Chroma 63004-150-60 DC Electronic Load 150V/60A/350W

Chroma 63004-150-60 DC Electronic Load 150V/60A/350W DC Electronic Load 150V/60A/350W Rated power: 350W Voltage range: 150V Current range: 60A max. CC, CR, CV and CP operation modes User-defined waveforms (UDW) CZ mode for turn on capacitive loadsimulation Real time power supply load transient response simulation User programmable 100 sequences via front panel High precision voltage and current measurement Voltage, current and Pmax measurement for OCP/OLP test Timing and discharging measurement for batteries Short circuit simulation Smart fan control Full protection: OC (adjustable), OT, OP (adjustable) protection and OV warning, polarity reverse alarm Rated power: 350W Static Load Dynamic Load Three Ranges and High Precision Measurement User-Defined Waveform (UDW) Program Sequence User-defined Hot Key Design The 63000 Series programmable DC electronic loads are reliable, precision instruments primarily designed to test switching power supplies, A/D power supplies, power electronic components, adapters, 3C batteries and chargers. Its maximum 350W rated power makes it suitable for testing numerous types of lower power devices. The 63000 Series offers models in two operating voltages 150V models, with 250W and 350W power levels up to 60A in a single unit. Their compact and light weight design make these loads easy to move around which is ideal for R&D and design validation. Each model of the 63000 Series has unique user-defined waveform (UDW) function capable of simulating real-world custom waveforms. In addition, a data storage function has been built in for saving and recalling up to 100 stored settings at any time. For automated testing, these save and recall functions can save a great deal of time. The 63000 Series has 3 power ranges that can precisely measure the voltage and current in real time. Since short circuit testing is a critical test item, the 63000 provides short circuit simulation to effectively address application demands for power and automated testing. With the LCD and rotary knob, the 63000 loads offer versatile front panel operation. For remote operation, users are able to control each model via standard USB or optional Ethernet/LXI and GPIB interfaces. PWM fan speed control has been embedded to reduce ambient noise. Static Load The 63000 Series electronic loads operate in constant voltage, current, resistance, power or impedance modes to satisfy a wide range of test requirements. CC Mode 63000_02-1 CR Mode 63000_02-2 CV Mode 63000_02-3 CP Mode 63000_02-4 Dynamic Load Programmable parameters: Current high/low level, T1/T2, rise/fall rate and execution times. Execution time setting range is 1 ~ 65,535. Suitable for testing D/D converters. 150V model’s current rise minimum response time is 20μs. One shot impulse current is loaded when it is set to execute once, which is very suitable for testing instant large withstand current of batteries. 63000_03-1 63000_03-2 Dynamic Change up to 25kHz 63000_03-3 One Shot Impulse Current CZ Mode To avoid charging the motherboard capacitors when the switching power supply powers on with surge current triggering the power supply over current protection mechanism making the power supply fail to turn on successfully, the power supply requires conducting a turn on capacitive load test. The 63000 Series provides CZ mode for turn on capacitive load simulation to tackle this testing demand. CZ mode simulates the actual inductance, impedance and capacitance for loading making the load current closer to real conditions. Three Ranges and High Precision Measurement High, medium and low three operating and measurement ranges. Voltage, current and power measurement specifications: 0.02%+0.02%F.S. accuracy for voltage 0.05%+0.05%F.S. accuracy for current 0.1%+0.1%F.S. for power